SMC摆动气缸SMC旋转执行器,CDRA1BS100-180C-A54

SMC摆动气缸SMC旋转执行器,CDRA1BS100-180C-A54

附图示出的外观在90°和100°的旋转。
尺寸显示加压到B端口。
附图示出了磁性开关安装在左舷。
是尺寸为180°和190°的旋转。

该轴顺时针旋转时的压力从A端口施加。
顺时针旋转端位置用角度调整螺钉进行调整。
采取适当的措施，从而没有过大的外部冲击或振动施加到角度调整螺钉。
如果不这样做可能导致的角度调节螺钉松动或下降。

SMC摆动气缸SMC旋转执行器,CDRA1BS100-180C-A54

Drawing shows the appearance for rotation of 90° and 100°.
Dimensions show pressurization to B port.
Drawing shows the auto switch mounted on the port side.
are the dimensions for rotation of 180° and 190°.
The shaft rotates clockwise when the pressure is applied from the A port.
The clockwise rotation end position is adjusted using the angle adjusting screw.
Take appropriate measures so that no excessive external impact or vibration is applied to the angle adjusting screw.
Failure to do so may cause the angle adjusting screw to become loose or drop.

AF30-03C-2 AF40-06C-Z AF50-06-R AF800-14-7-40
AF30-03C-2R AF40-06D AF50-06-W AF800-14-8
AF30-03C-6 AF40-06D-2 AF50-06-X401 AF800-14D
AF30-03C-8 AF40-06D-6 AF50-06-Z AF800-14-D
AF30-03C-J AF40-06D-7-2 AF50-10 AF800-14-R
AF30-03C-R AF40-06D-8 AF50-10-2 AF800-14-X242
AF30-03C-W AF40-06D-J AF50-10-2-X425 AF800-F12
AF30-03C-Z AF40-06D-R AF50-10-2-X430 AF800-F12-127-2
AF30-03D AF40-06D-W AF50-10-6 AF800-F14